Dell POWEREDGE M1000E - Manual (Page 254)

252 Configuring System Information
Figure 6-125. sFlow Poll Configuration
The sFlow Poll Configuration page contains the following fields:
• Poll DataSource— The sFlow Sampler data source for this flow sampler. This Agent supports physical
ports only.
• Receiver Index — The sFlowReceiver for this sFlow Counter Poller. If set to zero, the poller
configuration is set to the default and the poller is deleted. Only active receivers can be set. If a receiver
expires, then all pollers associated with the receiver will also expire. The allowed range is 1 to 8.
• Poll Interval — The maximum number of seconds between successive samples of the counters
associated with this data source. The range is 0 to 86400 seconds.
Displaying the sFlow Poller Summary Table
1. Open the sFlow Poll Configuration page .
2. Click Show All.
The sFlow Poll Summary page displays:
Figure 6-126. sFlow Poll Summary