Ip helper statistics – Dell POWEREDGE M1000E User Manual
Page 508
506
Configuring Routing
IP Helper Statistics
Use the IP Helper Statistics page to view UDP Relay Statistics for the switch.
To display the page, click Routing > IP Helper > Statistics in the tree view.
Figure 9-27. IP Helper Statistics
The IP Helper Statistics page contains the following fields:
• DHCP Client Messages Received — The number of valid messages received from a DHCP client.
The count is only increased if IP helper is enabled globally, the ingress routing interface is up, and the
packet passes a number of validity checks, such as having a TTL >1 and having valid source and
destination IP addresses.
•
DHCP Client Messages Relayed — The number of DHCP client messages relayed to a server. If a
message is relayed to multiple servers, the count is increased once for each server.
•
DHCP Server Messages Received — The number of DHCP responses received from the DHCP server.
This count only includes messages that the DHCP server unicasts to the relay agent for relay to the
client.
•
DHCP Server Messages Relayed — Specifies the number of DHCP server messages relayed to a client.
• UDP Client Messages Received — The number of valid UDP packets received. This count includes
DHCP messages and all other protocols relayed. Conditions are similar to those for the first statistic in
this table.
•
UDP Client Messages Relayed — The number of UDP packets relayed. This count includes DHCP
messages relayed as well as all other protocols. The count is increased for each server to which a packet
is sent.