Dell POWEREDGE M1000E - Manual (Page 340)

338 Configuring Switching Information
The Bind IP Subnet to VLAN page contains the following fields:
• IP Address — Specifies packet source IP address.
•
Subnet Mask — Specifies packet source IP subnet mask.
• Bind to VLAN (1–4093) — Specifies VLAN to which the IP Address is assigned.
Binding an IP Subnet to a VLAN
1. Open the Bind IP Subnet to VLAN page.
2. Enter the IP Address to bind to the VLAN.
3. Enter the IP Subnet associated with the IP address.
4. Enter the VLAN ID to which the IP address and subnet mask are assigned.
5. Click Apply Changes.
The listed VLAN and IP Subnet are now bound, and the device is updated.
Displaying the IP Subnet - VLAN Bind Table
1. Open the Bind IP Subnet to VLAN page.
2. Click Show All.
3. The IP Subnet - VLAN Bind Table displays.
Figure 7-61. IP Subnet - VLAN Bind Table
Modifying the VLAN Bound to Multiple IP Addresses
1. Open the Bind IP Subnet to VLAN page.
2. Click Show All.
The IP Subnet - VLAN Bind Table displays.
3. Click Edit for each entry to modify.
4. Edit the fields as needed.
5. Click Apply Changes.
The Bind to VLAN settings are modified, and the device is updated.