Dell POWEREDGE M1000E User Manual
Page 171
Configuring System Information
169
Figure 6-53. TACACS+ Settings
The TACACS+ Settings page contains the following fields:
• Host Name / IP Address — Specifies the TACACS+ Server.
• Priority (0
–
65535) — Specifies the order in which the TACACS+ servers are used. The default is 0.
•
Authentication Port (0
–
65535) — The port number through which the TACACS+ session occurs.
The default is port 49.
•
Key String (0
–
128 Characters) — Defines the authentication and encryption key for TACACS+
communications between the device and the TACACS+ server. This key must match the encryption
used on the TACACS+ server. Check
Use Default to use the default value.
• Timeout for Reply (1
–
30) — The amount of time that passes before the connection between the
device and the TACACS+ server times out. The field range is from 1 to 30 seconds. Check
Use
Default to select the factory-default value.
•
Status — The connection status between the device and the TACACS+ server. The possible field
values are:
–
Connected — There is currently a connection between the device and the TACACS+ server.