Dell POWEREDGE M1000E - Manual (Page 139)

Configuring System Information 137
Host Name Mapping
Use the Host Name Mapping page to assign an IP address to a static host name. The Host Name
Mapping page provides one IP address per host.
To display the Host Name Mapping page, click System > IP Addressing > Host Name Mapping.
Figure 6-28. Host Name Mapping
The Host Name Mapping page contains the following fields:
• Host Name — Contains a list of host names. Host names are defined on the Add Static Host Name
Mapping page. Each host provides one IP address.
• IP Address — Provides an IP address that is assigned to the specified host name.
• Remove Host Name — Removes the host name IP mapping when checked.
Adding Host Domain Names
1. Open the Host Name Mapping page .
2. Click Add.
The Add Static Host Name Mapping page displays: