Dell POWEREDGE M1000E - Manual (Page 680)

678 Configuring IP Multicast
DVMRP Global Configuration
Use the DVMRP Global Configuration page to configure global DVMRP settings.
To display the page, click IP Multicast > DVMRP > Global Configuration in the tree view.
Figure 12-19. DVMRP Global Configuration
The DVMRP Global Configuration page contains the following fields:
• Admin Mode — Select Enable or Disable from the drop-down menu. This sets the administrative
status of DVMRP to active or inactive. The default is Disable.
• Version — The current value of the DVMRP version string.
• Total Number of Routes — The number of routes in the DVMRP routing table.
• Reachable Routes — The number of routes in the DVMRP routing table that have a non-infinite
metric.
Setting the DVMRP Admin Mode
1. Open the DVMRP Global Configuration page.
2. Set Admin Mode to Enable or Disable, to turn DVMRP on or off.
3. Click Apply Changes.
The DVMRP configuration is saved, and the device is updated.