Dell POWEREDGE M1000E - Manual (Page 331)

Configuring Switching Information 329
The Double VLAN Interface Configuration page contains the following fields:
• Interface — Select the port or LAG for which you want to display or configure data.
•
Interface Mode — Enables or disables double VLAN tagging on the selected interface. The default
value is Disable.
Assigning Double VLAN Tags
1. Open the Double VLAN Global Configuration page.
2. Select the Ethertype from the drop-down menu.
3. Click Apply Changes.
4. Open the Double VLAN Interface Configuration page.
5. Select the port to which you want to assign settings from the Interface drop-down menu.
6. Select the Interface Mode from the drop-down menu.
7. Click Apply Changes.
The Double VLAN settings are defined, and the device is updated.
Displaying the Double VLAN Port Parameters Table
1. Open the Double VLAN Interface Configuration page.
2. Click Show All.
The Double VLAN Port Parameters Table displays.
Figure 7-53. Double VLAN Port Parameters Table