Dell POWEREDGE M1000E - Manual (Page 728)

726 Configuring IP Multicast
Static RP Configuration
Use the Static RP Configuration page to create the specified static RP IP Address for the PIM-SM
router.
To display the page, click Multicast > PIM-SM > Static RP Configuration in the tree view.
Figure 12-53. Static RP Configuration
The Static RP Configuration page contains the following fields:
• IP Address — IP Address of the RP to be created.
•
Group — Group Address of the RP to be created.
• Group Mask — Group IP Mask of the RP to be created.
Existing configurations display in a table at the bottom of the page.
Configuring Static RP
1. Open the Static RP Configuration page.
2. Enter the IP Address, the IP address for the Group, and the Group Mask for the static RP
configuration.
3. Click Apply Changes.
The specified static RP IP Address for the PIM-SM router is created, and the device is updated.