Dell POWEREDGE M1000E - Manual (Page 646)

644 Configuring Quality of Service
The DSCP Queue Mapping Table page contains the following fields:
• DSCP In — Check to select as a criterion, and enter which DiffServ Code Point in the packet to use.
This field determines to which queue the packet is sent.
• Queue ID — Selects the queue to which the packet is sent.
Restoring Queue Defaults
1. Open the DSCP Queue Mapping Table page.
2. Click the Restore Defaults check box.
3. Click Apply Changes.
Queue values are returned to their defaults, and the device is updated.
Mapping Table Configuration Using the CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• QoS Commands
Interface Configuration
Use the Interface Configuration page to specify ports individually for CoS configuration and to apply an
interface shaping rate to the selected ports.
To display the Interface Configuration page, click Quality of Service > Class of Service > Interface
Configuration in the tree view.
Figure 11-18. Interface Configuration