Dell POWEREDGE M1000E - Manual (Page 620)

618 Configuring IPv6
Figure 10-35. IPv6 Route Preferences
The IPv6 Route Preferences page contains the fields shown below. In each case, the lowest values
indicate the highest preference.
• Local — This field displays the local route preference value.
•
Static — The static route preference value in the router. The default value is 1. The range is 1 to 255.
• OSPF Intra — The OSPF intra route preference value in the router. The default value is 110.
• OSPF Inter — The OSPF inter route preference value in the router. The default value is 110.
•
OSPF External — The OSPF External route preference value in the router (OSPF Type-1 and OSPF
Type-2 routes). The default value is 110.
Configuring IPv6 Route Preferences
1. Open the IPv6 Route Preferences page.
2. Configure the default preference for each protocol.
3. Click Apply Changes.
Route preferences are configured for IPv6, and the device is updated.