Dell POWEREDGE M1000E - Manual (Page 576)

574 Configuring IPv6
• Domain Name — Displays the selected DNS domain name from the previous field. Enter a new DNS
domain name here when Add is selected in the previous field. A maximum of 255 alphanumeric
characters can be entered. Click Delete to remove a domain name from this pool. The name is deleted
when Apply Changes is clicked.
• Delete Pool — Check this box to delete the displayed pool. The pool is deleted when Apply Changes
is clicked.
Creating a DHCPv6 Pool
1. Open the Pool Configuration page.
2. Select Create from the Pool Name drop-down menu.
3. Enter a new name in the Pool Name field.
4. Specify an existing DNS Server Address to associate with this pool, or create a new one.
5. Specify an existing Domain Name to associate with this pool, or create a new one.
6. Click Apply Changes.
The new pool is saved, and the device is updated. If a new DNS server address or domain name was
specified, it is also saved.
Modifying DHCPv6 Pool Parameters
1. Open the Pool Configuration page.
2. Select the pool for which parameters are changing from the drop-down Pool Name menu.
3. Change or set up a new DNS Server Address for the specified pool.
4. Change or set up a new Domain Name for the specified pool.
5. Click Apply Changes.
The DHCPv6 Pool parameter modifications are saved, and the device is updated.
Deleting a DHCPv6 Pool or Parameter
1. Open the Pool Configuration page.
2. Select the pool to be affected from the drop-down Pool Name menu.
3. Click the Delete box if deleting the DNS Server Address for this pool.
4. Click the Delete box if deleting the Domain Name for this pool.
5. Click the Delete Pool box if deleting the entire pool.
6. Click Apply Changes.
The pool or its parameter setting is deleted, and the device is updated.