Dell POWEREDGE M1000E - Manual (Page 449)

Viewing Statistics and Remote Monitoring 447
The Ports Statistics page contains the following fields:
• Unit No. — Selects the port to be displayed.
•
Interface Statistics — Selects Interface Statistics when clicked, and specifies the type of interface
statistics to graph from the drop-down menu. The default is Received Rate (MFrame Bits/sec).
• Etherlike Statistics — Selects Etherlike Statistics when clicked, and specifies the type of etherlike
statistics to graph from the drop-down menu. The default is Frame Check Sequence (FCS) Errors.
• RMON Statistics — Selects RMON Statistics when clicked, and specifies the type of RMON statistics
to graph from the drop-down menu. The default is Drop Events.
• GVRP Statistics — Selects GVRP Statistics when clicked, and specifies the type of GVRP statistics to
graph from the drop-down menu. The default is Join Empty - Receive.
• Refresh Rate — Selects the amount of time that passes before statistics are refreshed. The possible
field values are No Refresh, 15, 30 and 60 seconds. The default rate is No Refresh.
Displaying Port Statistics
1. Open the Ports Statistics page.
2. Select the port for which statistics will be charted.
3. Click the radio button associated with the statistics to chart.
4. Select the type of statistics from the related drop-down menu.
5. Select the desired refresh rate from the Refresh Rate drop-down menu.
6. Click Draw.
The selected statistics are charted on the graph.
Viewing Port Statistics Using the CLI Commands
For information about the CLI commands that perform this function, see the following chapters in the
CLI Reference Guide :
• System Management Commands
• RMON Commands
• GVRP Commands