Dell POWEREDGE M1000E - Manual (Page 334)

332 Configuring Switching Information
Assigning Port Settings
1. Open the VLAN Port Settings page.
2. Select the port to which you want to assign settings from the Unit and Port drop-down menus.
3. Complete the remaining fields on the page.
4. Click Apply Changes.
The VLAN port settings are defined, and the device is updated.
Displaying the VLAN Port Table
1. Open the VLAN Port Settings page.
2. Click Show All.
The VLAN Port Table displays.
Figure 7-55. VLAN Port Table
Note: If an Access port is chosen, the packet types that are accepted on the port (packet type) cannot be
designated. It is also not possible to enable or disable ingress filtering on an access port.
3. Use the Unit drop-down menu to view the VLAN Port Table for other units in the stack, if they exist.
Modifying Settings for Multiple Ports
1. Open the VLAN Port Settings page.
2. Click Show All.
The VLAN Port Table displays.
3. Click Edit for each Port to modify.
4. Edit fields as needed.
5. Click Apply Changes.
The VLAN port settings are modified, and the device is updated.