Dell POWEREDGE M1000E - Manual (Page 707)

Configuring IP Multicast 705
Configuring PIM-DM for an Interface
1. Open the PIM-DM Interface Configuration page.
2. Select the interface to configure from the Interface field.
3. Modify the remaining fields as needed.
4. Click Apply Changes.
The interface configuration is saved, and the device is updated.
Configuring PIM-DM for an Interface using the CLI Command
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• PIM-DM Commands
PIM-DM Interface Summary
Use the PIM-DM Interface Summary page to display a PIM interface and its settings.
To display the page, click IPv4 Multicast > PIM > Interface Summary or IPv6 Multicast > PIM >
Interface Summary in the tree view.
Figure 12-37. PIM Interface Summary