Ip interface configuration – Dell POWEREDGE M1000E User Manual
Page 463
Advertising
Configuring Routing
461
Refreshing IP Statistics
1. Open the IP Statistics
page.
2. Click Refresh.
The screen displays with the present state of the data in the switch.
Displaying IP Statistics using the CLI Command
For information about the CLI command that performs this function, see the following chapter in the
CLI Reference Guide:
• IP Routing Commands
IP Interface Configuration
Use the IP Interface Configuration
page to update IP interface data for this switch. The IP interface
configuration includes the ability to configure the bandwidth, Destination Unreachable messages, and
ICMP Redirect messages.
To display the page, click Routing > IP > Interface Configuration in the tree view.
Figure 9-5. IP Interface Configuration
Advertising