Dell POWEREDGE M1000E - Manual (Page 548)

546 Configuring Routing
• IPv6 Address —Select an IPv6 address for the selected Tunnel interface. Add is also a valid choice if
the maximum number of addresses has not been configured.
• IPv6 Address — When Add is chosen from the IPv6 Address drop-down menu, this IPv6 address input
field becomes visible. The Address must be entered in the format prefix/length.
You also have the option to specify the 64-bit extended unique identifier (EUI-64).
• IPv6 Prefix Length — Specify the IPv6 prefix length.
• Source — Select the desired source, IPv4 Address or Interface. If Address is selected, the source
address for this tunnel must be entered in dotted decimal notation. If Interface is selected the source
interface for this tunnel must be selected. The address associated with the selected interface is used as
the source address.
• Destination Address — The IPv4 destination address for this tunnel in dotted decimal notation.
Creating a New Tunnel
1. Open the Tunnels Configuration page.
2. Select Create from the Tunnel drop-down menu.
3. Specify an ID to use in the Tunnel ID field.
4. Click Apply Changes.
The Tunnel ID field is removed, and the remaining tunnel fields display.