Dell POWEREDGE M1000E - Manual (Page 293)

Configuring Switching Information 291
The Protected Port Configuration page contains the following fields:
• Port — Specifies the Unit and Port for which port parameters are defined.
•
Protected Group ID — Drop-down menu used to assign a port to Group 0, 1, or 2.
• Remove Group Name — Check this box to disassociate the selected port from the protected group.
Displaying the Protected Port Table
1. Open the Protected Port Configuration page.
2. Click Show All.
The Protected Ports Summary table displays.
Figure 7-23. Protected Port Summary Table
3. Select the Remove check box and click Apply Changes to disassociate a port from a protected group.
4. Use the Unit drop-down menu to view the Protected Port Summary table for other units in the stack,
if they exist.
Adding Protected Port Groups
1. Open the Protected Port Configuration page.
2. Click Add.
The Add Protected Group displays.