Dell POWEREDGE M1000E - Manual (Page 245)

Configuring System Information 243
Viewing Supported Switches Using the CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• System Management Commands
Stack Port Summary
Use the Stack Port Summary page to view the stackable ports present. This screen displays the unit, the
stackable interface, the configured mode of the interface, the running mode as well as the link status and
link speed of the stackable port.
To display the Stack Port Summary page, click System > Stacking > Stack Port Summary in the tree
view.
Figure 6-118. Stack Port Summary
The Stack Port Summary page contains the following fields:
• Unit — ID number of the unit.
•
Interface — Identifies the stack interface assigned to the unit.
• Configured Stack Mode (configurable only on the PowerConnect M6348) — Indicates whether or
not each unit is able to participate in the stack.
• Running Stack Mode — Indicates whether or not each unit is actually participating in the stack.