Dell POWEREDGE M1000E User Manual
Page 655
Configuring IP Multicast
653
The Multicast Global Configuration page contains the following fields:
• Admin Mode — Select Enable or Disable to set the administrative status of Multicast Forwarding in
the router. The default is Disable.
•
Protocol State — The operational state of the multicast forwarding module.
•
Table Maximum Entry Count — The maximum number of entries in the IP Multicast routing table.
• Number Of Packets For Which Source Not Found — The number of multicast packets that were
supposed to be routed but which failed the RPF check.
•
Number Of Packets For Which Group Not Found — The number of multicast packets that were
supposed to be routed but for which no multicast route was found.
• Protocol — The multicast routing protocol presently activated on the router, if any.
•
Table Entry Count — The number of multicast route entries currently present in the Multicast route
table.
•
Table Highest Entry Count — The highest number of multicast route entries that have been present
in the Multicast route table.