Dell POWEREDGE M1000E - Manual (Page 93)

Configuring Dell PowerConnect 91
2. The boot process resumes.
Update Boot Code
Use option 7 to update the boot code in the FLASH memory. This option is only valid after loading new
boot code using Boot Menu option 4. User action is confirmed with a Y/N question before executing the
command.
To download software from the Boot menu:
1. On the Boot menu, select 7 and press <Enter>.
The following prompt displays:
Do you wish to update Boot Code? (y/n) y
Erasing Boot Flash.....Done.
Wrote 0x10000 bytes.
Wrote 0x20000 bytes.
Wrote 0x30000 bytes.
Wrote 0x40000 bytes.
Wrote 0x50000 bytes.
Wrote 0x60000 bytes.
Boot code updated
2. The boot process resumes.
Delete Backup Image
Use option 8 to delete the backup image from the FLASH memory. User action is confirmed with a Y/N
question before executing the command.
To delete the backup image from the Boot menu:
1. On the Boot menu, select 8 and press <Enter>.
The following prompt displays:
Are you SURE you want to delete backup image : image2 ? (y/n):y
Backup image deleted...
[Boot Menu]
2. The boot process resumes.