Dell POWEREDGE M1000E User Manual
Page 306
304
Configuring Switching Information
Figure 7-35. Dynamic Address Table
The Dynamic Address Table contains the following fields:
• Address Aging (10–1000000) — Specifies aging time in seconds before a dynamic MAC address is
erased. The default value is 300 seconds.
• Clear Table — Clears all dynamic MAC address data from the table when checked and Apply Changes
is clicked.
•
The Dynamic Address Table can be queried by:
–
Interface — Specifies Unit and Port queried for an address.
–
LAG — Specifies the LAG queried for an address.
–
MAC Address — Specifies the MAC address queried for an address.
–
VLAN ID — Specifies the VLAN number (to which the MAC address is attached) that is queried
for an address.
• The
Current Address Table contains dynamic address parameters by which packets are directly
forwarded to the ports. The
Current Address Table contains the following fields:
•
VLAN ID — Displays the VLAN Tag value.
•
MAC Address— Displays the MAC address.