Dell POWEREDGE M1000E - Manual (Page 140)

138 Configuring System Information
Figure 6-29. Add Static Host Name Mapping
3. Define the relevant fields.
4. Click Apply Changes.
The IP address is mapped to the host name, and the device is updated.
Displaying the Static Host Name Mapping Table
1. Open the Host Name Mapping page .
2. Click Show All.
The Static Host Name Mapping Table displays:
Figure 6-30. Static Host Name Mapping Table
Removing a Host Name From IP Address Mapping
1. Open the Host Name Mapping page .
2. Click Show All.
The Host Name Mapping Table opens.
3. Select a Host Name Mapping Table entry.
4. Check the Remove check box.
5. Click Apply Changes.
The Host Name Mapping Table entry is removed, and the device is updated.