Dell POWEREDGE M1000E - Manual (Page 346)

344 Configuring Switching Information
Displaying the GVRP Port Parameters Table
1. Open the GVRP Global Parameters page.
2. Click Show All.
The GVRP Port Parameters Table displays.
Figure 7-66. GVRP Port Parameters Table
3. Use the Unit drop-down menu to view the GVRP Port Parameters Table for other units in the stack, if
they exist.
Copying GVRP Parameters
1. Open the GVRP Global Parameters page.
2. Click Show All.
The GVRP Port Parameters Table displays.
3. Specify the Port or LAG you are copying from in Copy Parameters From.
4. Click Copy To for each Interface/LAG to receive these parameters.
5. Click Apply Changes.
The GVRP Port Parameter settings are copied, and the device is updated.