Dell POWEREDGE M1000E - Manual (Page 172)

170 Configuring System Information
– Not Connected — There is not currently a connection between the device and the TACACS+
server.
The fields in the Default Parameters section of the page contain values that are automatically applied to
new TACACS+ servers.
• Key String (0 – 128 Characters) — Enter the default authentication and encryption key for TACACS+
communication between the device and the TACACS+ server.
• Timeout for Reply (1 – 30) — Enter the global user configuration time that passes before the
connection between the device and the TACACS+ times out.
Defining TACACS+ Parameters
1. Open the TACACS+ Settings page.
2. Define the fields as needed.
3. Click Apply Changes.
The TACACS+ settings are updated to the device.
Adding a TACACS+ Server
1. Open the TACACS+ Settings page.
2. Click Add.
The Add TACACS+ Host page displays.
Figure 6-54. Add TACACS+ Host
3. Define the fields as needed.
4. Click Apply Changes.
The TACACS+ server is added, and the device is updated.
Displaying a TACACS+ Servers List
1. Open the TACACS+ Settings page.
2. Click Show All.