Dell POWEREDGE M1000E - Manual (Page 358)

356 Configuring Switching Information
Figure 7-74. Bridge Multicast Group
The Bridge Multicast Group page contains the following fields:
• VLAN ID — Selects the VLAN to add a multicast group to or to modify ports on an existing multicast
group.
• Bridge Multicast Address — Identifies the multicast group MAC address/IP address associated with
the selected VLAN ID. Use the Add button to associate a new address with a VLAN ID.
• Remove — Removes a Bridge Multicast address when checked.
Port and LAG Member Tables
The Bridge Multicast Group tables display which Ports and LAGs are members of the multicast group,
and whether they’re static (S), dynamic (D), or forbidden (F). The tables have two rows: Static and
Current. Only the Static row is accessible from this page. The Current row is updated when the Static
row is changed and Apply Changes is clicked.
The Bridge Multicast Group page contains two editable tables:
• Unit and Ports — Displays and assigns multicast group membership to ports. To assign membership,
click in Static for a specific port. Each click toggles between S, F, and blank. See the following table for
definitions.