Dell POWEREDGE M1000E - Manual (Page 252)

250 Configuring System Information
Figure 6-123. sFlow Sampler Configuration
The sFlow Sampler Configuration page contains the following fields:
• Sampler DataSource— The sFlow data source for this sFlow sampler. This Agent supports physical
ports only.
• Receiver Index — The sFlow Receiver for this sFlow sampler. If set to zero, no packets will be sampled.
Only active receivers can be set. If a receiver expires, then all samplers associated with the receiver will
also expire. The allowed range is 1 to 8.
• Sampling Rate — The statistical sampling rate for packet sampling from this source. A sampling rate
of zero (0) disables sampling. The allowed range is 1024 to 65536.
• Maximum Header Size — The maximum number of bytes that should be copied from a sampled
packet. The allowed range is 20 to 256.
Displaying the sFlow Sampler Summary Table
1. Open the sFlow Sampler Configuration page .
2. Click Show All.
The sFlow Sampler Summary page displays: