Dell POWEREDGE M1000E - Manual (Page 303)

Configuring Switching Information 301
Figure 7-32. Static MAC Address
The Static MAC Address page contains the following fields:
• Interface — Specifies the Unit and Port or LAG to which the static MAC address is applied. To view
addresses for a different Unit/Port or LAG, change the Interface listed here.
• VLAN ID - MAC Address — Specifies VLAN ID attached to the MAC Address and the MAC
address(es) included in the current static address list.
Note: Only MAC addresses assigned to the specified interface and VLAN are displayed.
• Status — Specifies status of the MAC address. Possible values are:
– Permanent — The MAC address is permanent.
– Secure — Guarantees that a locked port MAC address is not deleted.
– Delete on Reset — The MAC address is deleted when the switch is reset.
– Delete on Timeout — The MAC address is deleted when a timeout occurs.
Adding a Static MAC Address
1. Open the Static MAC Address page .
2. Click Add.
The Add Static MAC Address page displays.