Dell POWEREDGE M1000E - Manual (Page 621)

Configuring IPv6 619
Configuring IPv6 Route Preferences using the CLI Command
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide :
• IPv6Routing Commands
Configured IPv6 Routes
Use the Configured IPv6 Routes page to display selected IPv6 routes.
To display the page, click IPv6 > IPv6 Routes > Configured IPv6 Routes in the tree view.
Figure 10-36. Configured IPv6 Routes
The Configured IPv6 Routes page contains the following fields:
• Routes Displayed — Select to view either the Configured Routes, Best Routes or All Routes.
When the Configured Routes option is selected, the following fields appear:
• IPv6 Prefix/Prefix Length — Displays the Network Prefix and Prefix Length for the Configured Route.
•
Next Hop IP — Displays the Next Hop IPv6 Address for the Configured Route.
• Next Hop Interface — Displays the Next Hop Interface for the Configured Route.
• Preference — Displays the Route Preference of the Configured Route.