Dell POWEREDGE M1000E - Manual (Page 292)

290 Configuring Switching Information
Modifying Port Configuration Settings for Multiple Ports
1. Open the Port Configuration page.
2. Click Show All.
The Port Configuration Table displays.
3. Click Edit for each Port to modify.
4. Edit the Port Configuration fields as needed.
5. Click Apply Changes.
The Port Configuration settings are modified, and the device is updated.
Configuring Ports with CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide :
• Ethernet Configuration Commands
Protected Port Configuration
Use the Protected Port Configuration page to specify a Layer 2 security feature, Private VLAN Edge
(PVE) ports, that provides port-based security between ports that are members of the same VLAN.
Traffic from protected ports is sent only to the uplink ports and cannot be sent to other ports within the
VLAN.
To display the Port Configuration page, click Switching > Ports > Protected Port Configuration in the
tree view.
Figure 7-22. Protected Port Configuration