Dell POWEREDGE M1000E - Manual (Page 162)

160 Configuring System Information
Applying an Authentication Profile to Telnet Sessions
1. Open the Select Authentication page.
2. Select an authentication profile in the Telnet
field.
3. Click Apply Changes.
Console sessions are assigned authentication profiles.
Applying an Authentication Profile to Secure Telnet (SSH) Sessions
1. Open the Select Authentication page.
2. Select an authentication profile in the Secure Telnet (SSH)
field.
3. Click Apply Changes.
Secure Telnet (SSH) sessions are assigned authentication profiles.
Assigning HTTP Sessions an Authentication Sequence
1. Open the Select Authentication page.
2. Under HTTP, select an authentication method in the Optional Methods field and click the right
arrow button.
The selected authentication method moves to the Selected Methods field.
3. Repeat until the desired authentication sequence is displayed in the Selected Methods field.
4. Click Apply Changes.
HTTP sessions are assigned the authentication sequence.
Assigning Access Methods, Authentication Profiles, or Sequences Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide :
• AAA Commands.
Assigning Secure HTTP Sessions an Authentication Sequence
1. Open the Select Authentication page.
2. Under Secure HTTP, select an authentication method in the Optional Methods field and click the
right arrow button.
The selected authentication method moves to the Selected Methods field.
3. Repeat until the desired authentication sequence is displayed in the Selected Methods field.
4. Click Apply Changes.
Secure HTTP sessions are assigned the authentication sequence.