Dell POWEREDGE M1000E - Manual (Page 609)

Configuring IPv6 607
OSPFv3 Virtual Link Configuration
Use the OSPFv3 Virtual Link Configuration page to define a new or configure an existing virtual link.
To display this page, a valid OSPFv3 area must be defined through the OSPFv3 Area Configuration page.
To display the page, click IPv6 > OSPFv3 > Virtual Link Configuration in the tree view.
Figure 10-28. OSPFv3 Virtual Link Configuration
The OSPFv3 Virtual Link Configuration page contains the following fields:
• Create New Virtual Link — Select this option from the drop-down menu to define a new virtual link.
The area portion of the virtual link identification is fixed: you are prompted to enter the Neighbor
Router ID on a new screen.
• Virtual Link (Area ID - Neighbor Router ID) — Select the virtual link for which you want to display
or configure data. It consists of the Area ID and Neighbor Router ID.
• Hello Interval (secs) — Enter the OSPF hello interval for the specified interface in seconds. This
parameter must be the same for all routers attached to a network. Valid values range from 1 to 65,535.
The default is 10 seconds.