Mld proxy configuration – Dell POWEREDGE M1000E User Manual

Page 673

Advertising
background image

Configuring IP Multicast

671

The MLD Traffic page contains the following fields:

Valid MLD Packets Received — The total number of valid MLD packets received by the router.

Valid MLD Packets Sent — The total number of valid MLD packets sent from the router

Querier Received — The total number of MLD packets sent as the MLD querier.

Querier Sent — The total number of MLD packets sent as the MLD querier.

Reports Received — The total number of MLD reports received.

Reports Sent — The total number of MLD reports received.

Leaves Received — The total number of MLD Leave messages received.

Leaves Sent — The total number of MLD Leave messages received.

Click Refresh to display the latest information from the router.
Click Clear Traffic to reset all counters to their default values.

MLD Proxy Configuration

When you configure an interface in MLD proxy mode, it acts as a proxy multicast host that sends MLD

membership reports on one interface for MLD Membership reports received on all other MLD-enabled

router interfaces.
Use the MLD Proxy Interface Configuration page to enable and disable ports as MLD proxy interfaces.

To display this page, click IPv6 Multicast > MLD > Proxy Interface > Interface Configuration in the

navigation tree.

Figure 12-15. MLD Proxy Interface Configuration

Advertising