Dell POWEREDGE M1000E - Manual (Page 682)

680 Configuring IP Multicast
Configuring a DVMRP Interface
1. Open the DVMRP Interface Configuration page.
2. Select the interface to configure from the Interface field.
3. Modify the remaining fields as needed.
4. Click Apply Changes.
The interface configuration is saved, and the device is updated.
Configuring a DVMRP Interface using the CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• DVMRP Commands
DVMRP Configuration Summary
Use the DVMRP Configuration Summary page to display or print the DVMRP configuration and data
for a selected interface. You must configure at least one router interface before you can display data for a
DVMRP interface. Otherwise you see a message telling you that no router interfaces are available, and
the configuration summary screen is not displayed.
To display the page, click IP Multicast > DVMRP > Configuration Summary in the tree view.