Dell POWEREDGE M1000E - Manual (Page 436)

434 Viewing Statistics and Remote Monitoring
RMON History Control Statistics
Use the RMON History Control page to maintain a history of statistics on each port. For each interface
(either a physical port or a port-channel), you can define how many buckets exist, and the time interval
between each bucket snapshot.
To display the page, click Statistics/RMON > RMON > History Control in the tree view.
Figure 8-8. RMON History Control
The RMON History Control page contains the following fields:
• History Entry — Selects entry number on the RMON History Control Table.
•
Source Interface — Specifies interface from which the history samples are taken.
• Owner (0–20 characters) — Indicates RMON station or user that requested the RMON information.
•
Max No. of Samples to Keep (1–65535) — Sets the number of historical buckets for this interface.
• Current No. of Samples in List — Displays the current number of samples taken.
• Sampling Interval (1–3600) — Sets the frequency at which samplings are taken from the ports. The
possible values are from 1 to 3600 seconds. The default is 1800 seconds (30 minutes).
• Remove — Removes the RMON History Control Table entry displayed when checked.