Dell POWEREDGE M1000E - Manual (Page 683)

Configuring IP Multicast 681
Figure 12-21. DVMRP Configuration Summary
The DVMRP Configuration Summary page contains the following fields:
• Interface — Select the interface for which data is to be displayed. You must configure at least one
router interface before you can display data for a DVMRP interface.
Interface Parameters
• Interface Mode — Displays the administrative mode of the selected DVMRP routing interface, either
Enable or Disable.
• Protocol State — Displays the operational state of the DVMRP protocol on the selected interface,
either Operational or Non-operational.
• Local Address — Displays the IP address used as a source address in packets sent from the selected
interface.
• Interface Metric — Displays the metric used to calculate distance vectors for the selected interface.
Interface Statistics
• Generation ID — Displays the DVMRP generation ID used by the router for the selected interface.
This value is reset every time an interface is (re)started and is placed in prune messages. A change in
generation ID informs the neighbor routers that any previous information about this router should be
discarded.
• Received Bad Packets — The number of invalid packets received on the selected interface.