Dell POWEREDGE M1000E - Manual (Page 595)

Configuring IPv6 593
OSPFv3 Area Range Configuration
Use the OSPFv3 Area Range Configuration page to configure OSPFv3 area ranges.
To display the page, click IPv6 > OSPFv3 > Area Range Configuration in the tree view.
Figure 10-22. OSPFv3 Area Range Configuration
The OSPFv3 Area Range Configuration page contains the following fields:
• Area ID — Selects the area for which data is to be configured.
• IPv6 Prefix/Prefix Length — Enter the IPv6 Prefix/Prefix Length for the address range for the selected
area.
• LSDB Type — Select the type of Link Advertisement associated with the specified area and address
range. The default type is Network Summary.
• Advertisement — Select Enable or Disable from the drop-down menu. If you selected Enable, the
address range is advertised outside the area through a Network Summary LSA. The default is Enable.