Dell POWEREDGE M1000E - Manual (Page 442)

440 Viewing Statistics and Remote Monitoring
Modifying an RMON Event
1. Open the RMON Event Control page.
2. Click Show All to display the Event Control Table page.
3. Select the Edit check box in for the event entry to change.
4. Modify the fields on the page as needed.
5. Click Apply Changes.
The RMON Events Table entry is modified, and the device is updated.
Displaying the RMON Event Control Table
1. Open the RMON Event Control page.
2. Click Show All.
The Event Control Table displays.
Figure 8-14. Event Control Table
Removing RMON Event Entries
1. Open the RMON Event Control page.
2. Choose the event to remove from the drop-down menu in the Event Entry field and check Remove.
3. Click Apply Changes.
The table entry is removed, and the device is updated.
Defining Switch Events Using the CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide :
• RMON Commands