Dell POWEREDGE M1000E - Manual (Page 350)

348 Configuring Switching Information
Figure 7-68. LACP Parameters
The LACP Parameters page is divided into two sections: Global Parameters and Port Parameters.
Following are the fields on this page:
Global Parameters
• LACP System Priority (1–65535) — Indicates the LACP priority value for global settings. The default
value is 1.
Port Parameters
• Interface— Specifies the unit and port number to which timeout and priority values are assigned.
•
LACP Port Priority (1–65535) — Specifies LACP priority value for the specified port. The default
value is 1.
• LACP Timeout — Specifies Administrative LACP timeout. Possible values are:
– Short — Specifies a short timeout value.
– Long — Specifies a long timeout value. This is the default.
Defining Link Aggregation Parameters
1. Open the LACP Parameters page.
2. Complete the fields as needed.
3. Click Apply Changes.
The parameters are defined, and the device is updated.