Dell POWEREDGE M1000E - Manual (Page 242)

240 Configuring System Information
• Plugged-in Model Identifier — A 16-byte character string to identify the plugged-in model of the
selected unit.
• Switch Status — Displays the status of the selected unit. The possible values are:
– OK — The unit is in place and functioning.
– Unsupported — The unit is in place, but can not function as a member of the stack.
– Code Mismatch — The software of the switch does not match the master unit software.
– Config Mismatch — The configuration of the switch does not match the master unit
configuration.
– Not Present — The selected unit is not present.
• Switch Description — 80-byte data field used to identify the device.
Expected Code Type — Displays the expected code identifier.
• Detected Code Version — Running code version release number and version number.
•
Detected Code in Flash — Release number and version number of the code detected in flash.
• Up Time — Displays how long the unit has been running since its last reset.
• Remove Switch — Select this option to remove switch from the stack.
Stack Summary
Use the Stack Summary page to view a summary of switches participating in the stack.
To display the Stack Summary page, click System > Stacking > Stack Summary in the tree view.
Figure 6-116. Stack Summary
The Stacking Summary page contains the following fields:
• Switch ID — ID of the unit. The maximum number of units allowed in the stack is 8.
•
Management Status — This field indicates whether the switch is currently operating as the
management switch, the standby switch, or a stack member.
• Standby Status — This field identifies the switch that is configured as the Standby Unit. Possible
values are: