Dell POWEREDGE M1000E - Manual (Page 524)

522 Configuring Routing
Route Table
Use the Router Route Table page to display the route table configuration.
To display the page, click Routing > Router > Route Table in the tree view.
Figure 9-35. Router Route Table
The Router Route Table page displays the following fields:
• Total Number of Routes — The total number of routes in the route table.
• Network Address — The IP route prefix for the destination.
•
Subnet Mask — Also referred to as the subnet/network mask, this indicates the portion of the IP
interface address that identifies the attached network.
• Protocol — This field tells which protocol created the specified route. The possibilities are one of the
following:
–
Local
– Static
– Default
– OSPF Intra
– OSPF Inter