Dell POWEREDGE M1000E - Manual (Page 109)

Configuring System Information 107
Versions
Use the Versions page to view information about the software versions currently running.
To display the Versions page, click System > General > Versions in the tree view.
Figure 6-3. Versions
The Versions page contains the following fields:
• Unit No. — Displays the unit’s number in the stack.
• Boot Version — Displays the version of the boot code.
•
Image1 Version — Displays the version number of one of the two available software images.
• Image2 Version — Displays the version number of the other of the two available software images.
•
Current-Active — Displays the currently active software image.
• Next-Active — Displays the software image which will be loaded the next time the switch is rebooted.
Displaying Device Versions Using the CLI
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide :
• System Management Commands