Dell POWEREDGE M1000E - Manual (Page 388)

386 Configuring Switching Information
Figure 7-100. Link Dependency Group Configuration
3. To add a port to the Member Ports column, click the port in the Available Ports column, and then
click the << button to the left of the Available Ports column. Ctrl + click to select multiple ports.
4. To add a port to the Ports Depended On column, click the port in the Available Ports column, and
then click the >> button to the right of the Available Ports column.
5. Click Apply Changes.
The Link Dependency settings for the group are modified, and the device is updated.
6. Click Show All to return to the Link Dependency Summary page.
Removing All Ports From a Link Dependency Group
1. Open the Link Dependency Summary page.
2. From the Group ID row for the Link Dependency group to remove, select the Remove check box.
3. Click Apply Changes.
The all ports are removed from the Link Dependency group, and the device is updated.
Configuring Link Dependency Groups With CLI Commands
For information about the CLI commands that perform this function, refer to the following chapter in
the CLI Reference Guide :
• Link Dependency Commands