Navigation map view features – BendixKing KSN 770 - Pilots Guide User Manual
Page 111

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
6-13
Navigation Map View
Honeywell International Inc. Do not copy without express permission of Honeywell.
Navigation Map View Features
When the navigation map view is displayed, the map is capable of, but
not limited to, displaying the following information:
D
Navigation aids
D
Airports
D
Water features
D
Boundaries
D
Controlled airspace
D
Special use airspace
D
Obstructions
D
Relative terrain
D
Miscellaneous annunciators.
The FMS flight plan overlays all other symbols on the navigation map
except for the ownship, GPS track, and traffic symbols. The map
displays active leg and waypoint in magenta when guidance to the
waypoint is active, green when guidance to the waypoint is available but
not active, and white if the GPS position fails. All other waypoints and
legs are displayed in white.
AIRPORT SYMBOLS
Airport symbols are positioned on the navigation map view display at
the location corresponding to the airports latitude and longitude location
obtained from the navigation database.
If the internal SD card is removed from the card slot, or communications
with the card fail, the unit will continue to operate using the last data that
was loaded into memory. As the aircraft position changes, the software
will attempt to access the data card to retrieve additional data for a new
location. When this occurs, if the data card cannot be detected, an
annunciation
DATABASE FAILURE
is displayed. The previously
loaded data remains available, but new information (such as roads and
detailed terrain data not yet loaded into memory) will not be available
to add to the navigation map.