BendixKing KSN 770 - Pilots Guide - Manual (Page 335)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
Flight Management System (FMS)
15-62
Honeywell International Inc. Do not copy without express permission of Honeywell.
Changing Flight Plan Waypoints
A previously entered flight plan waypoint can be changed using the
CHNG bezel softkey. The desired waypoint must be highlighted using
the joystick knob or touchscreen. Activating the EDIT bezel softkey
label (if not already selected) ensures the FMS mode is
Flight Plan Edit . For the example flight plan, ATC instructs the pilot
after CARME, to fly direct to the Salinas VOR (SNS) instead of ANJEE.
Since the ANJEE waypoint needs to be changed, the waypoint is
highlighted on the waypoint list, as shown in Figure 15--58.
Figure 15--58
Changing Flight Plan Waypoints
NOTE: While in Flight Plan Edit mode, pushing the desired
waypoint twice on the touchscreen displays the
CHANGE WAYPOINT pop--up window.
Pushing the CHNG bezel softkey displays the nearest airports
waypoint list.