BendixKing KSN 770 - Pilots Guide - Manual (Page 157)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014 7-3
Charts View
Honeywell International Inc. Do not copy without express permission of Honeywell.
When the charts view control mode is active, a magenta CHRT #/#
annunciator is displayed in the lower--right corner of the display. The
first # is the selected chart number, and the second # is the total
number of charts available for the selected airport. Chart view control
mode allows the pilot to rotate the joystick knob to view different
terminal charts. Charts can also be selected by using the charts list,
described later in this section.
NOTE: Pushing the SEL softkey again or pushing in the joystick
knob disables the charts view control mode.
When the charts view control mode is inactive, the CHRT #/#
annunciator is removed from the display.
NOTE: If the charts database is invalid or unavailable, a gray
DATABASE FAILURE annunciator is displayed.
Range
The pilot has the ability to select the change range of a selected chart
at 1x, 2x, and 3x zoom levels. The zoom level is displayed in the
lower--left corner of the charts view, as shown in Figure 7--3. The zoom
range is adjusted by using the zoom- in/+ and zoom- out/- bezel
keys .
Figure 7--3
Charts Zoom Range