BendixKing KSN 770 - Pilots Guide - Manual (Page 170)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
Charts View
7-16
Honeywell International Inc. Do not copy without express permission of Honeywell.
AIRPORT DIAGRAM POP--UP FUNCTION
The airport diagram pop--up feature setting is controlled using the
APD QUICK ACCESS FUNCTION menu item on the menu. The
APD QUICK ACCESS FUNCTION has three settings: AUTO ,
MANUAL , and OFF .
NOTE: The setting is retained after a power cycle of the unit.
When the AUTO airport diagram pop--up function is active, the airport
diagram is automatically displayed at startup or after landing. The after
landing condition is met when the indicated airspeed and groundspeed
transition from greater than 30 knots to less than 30 knots. The airport
closest to the current latitude/longitude is automatically displayed
(when available).
In the MANUAL setting, at startup or after landing, the airport diagram
can be selected by pushing the PUSH FOR AIRPORT DIAGRAM
bezel softkey or touchscreen button .
NOTE: The AUTO and MANUAL settings perform no actions
when there is no airport diagram for the current aircraft
location.
When the airport diagram is displayed, the BACK touchscreen button
is displayed in the left--side of the display. Pushing the BACK bezel
softkey or touchscreen button returns to the previous active screen
display.
In the OFF setting, the airport diagram must be manually selected
using the normal selection procedures.