Figure 5-6 com/nav pop-up window states – BendixKing KSN 770 - Pilots Guide User Manual
Page 86
KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
KSN 770 Radio
5-4
Honeywell International Inc. Do not copy without express permission of Honeywell.
When the navigation identifier is OFF, the NAVAID is not automatically
tuned, as indicated by
ID: off
under the standby frequency.
When the NAVAID radio audio received from the tuned localizer or VOR
is sufficient and the navigation identifier is ON, the identifier is displayed
under the standby frequency next to
ID:
, as shown in Figure 5--5.
When the NAVAID radio audio received from the tuned localizer or VOR
is not sufficient, only
ID:
is displayed and the identifier field is blank.
The power--up default is NAV IDENT filter ON.
The COM/NAV radio control pop--up window displays the squelch and
identifier states, shown in Figure 5--6. The squelch and identifier states
can be controlled using the touchscreen.
Figure 5--6
COM/NAV Pop--Up Window States