BendixKing KSN 770 - Pilots Guide - Manual (Page 53)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014 2-17
User Interface and System Overview
Honeywell International Inc. Do not copy without express permission of Honeywell.
WIND is also displayed when in the polar regions when magnetic
variation is not available.
The active TO waypoint is displayed in magenta when guidance to the
waypoint is active, and green when guidance to the waypoint is
available but not active. If LOSS OF NAV is displayed, the active TO
waypoint is displayed in white.
The From and Next waypoints are always displayed in white. The DTG,
DTK, TRK, and GS are always displayed in green.
NOTE: When a discontinuity is active, the TO waypoint, DTG, and
DTK fields are displayed as dashes.
When a message condition is triggered, the message field is displayed
in the upper--line of the text data bar and is prioritized in the following
order:
D
TAWS messages
D
FMS messages -- Alerting
D
FMS messages -- Advisory.
TAWS and Alerting messages are persistent and must be manually
cleared using the joystick knob. Advisory messages are displayed for
5 seconds and then automatically removed.
LOW ALT is displayed over the groundspeed field in the text databar
as black text in a yellow background box and indicates the low altitude
alert has been reached. This is only available when TAWS is not
interfaced with the KSN 765/770.
An FMS message condition is shown in Figure 2--9. FMS messages are
described in Section 15, Flight Management System (FMS).
Figure 2--9
FMS Message
When a flight plan offset is active, the direction and distance of the offset
is displayed in the text data bar next to PSH SQ . Flight plan offsets
are described in detail in Section 15, Flight Management System
(FMS).