BendixKing KSN 770 - Pilots Guide - Manual (Page 439)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
Database Loading Procedures
16-2
Honeywell International Inc. Do not copy without express permission of Honeywell.
With the unit powered off, insert the USB drive into the USB port in the
front of the unit. When power is applied to the KSN 765/770, a database
loading page is displayed, as shown in Figure 16--1. On this page, the
installer can choose which databases are to be installed and see how
much time each database installation will take.
NOTE: The KSN 765/770 does not have a power button. The unit
powers--on with the aircraft avionics.
Figure 16--1
Database Loading Page
The KSN Databases column displays the currently installed databases
and version numbers. The installed databases are FMS Nav, Moving
Map, Cultural, Obstacle, Terrain, and Charts. The database version
number, start date, and status ( Valid , Expired , or Early ) is
displayed for each database.
Chart databases are provided directly by Seattle Avionics by accessing
the following website:
http://www.seattleavionics.com/ChartData/Default.aspx?TargetDevice=KSN
The USB Databases column lists each database as the same, newer,
older, or not present on the USB drive. The database version number
and start date are displayed for each database. When the installed
database and the USB database are the same, Same is displayed
above the version number. When the USB database is newer than the
installed database, Newer is displayed above the version number.
When the USB database is older than the installed database, Older
is displayed above the version number. When an installed database is
not contained on the USB drive, Not Present is displayed.