BendixKing KSN 770 - Pilots Guide - Manual (Page 297)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
Flight Management System (FMS)
15-24
Honeywell International Inc. Do not copy without express permission of Honeywell.
En Route Waypoints
To insert en route waypoints, the EDIT bezel softkey label must be
active. When in flight plan edit mode, the joystick knob is rotated until
the INS icon is displayed between the waypoints where the en route
waypoint is to be added, as shown in Figure 15--22.
Figure 15--22
Inserting En Route Waypoints
Alternatively, instead of using the joystick knob to select the insert
( INS ) location in the waypoint list, the touchscreen can be used to
select the insert location. While the flight plan edit mode is active, the
INS header is displayed at the top of the waypoint list. When
displayed, touching the right--half of the waypoint list display selects the
insert location.
For the example flight plan, the en route portion begins at SXC on
Vector 208 to Ventura VOR (V208.VTU). However, before an airway
can be loaded, the beginning and ending NAVAID or fix must be
entered. To enter VTU into the flight plan list, push the INS bezel
softkey, shown in Figure 15--22.